Configuring PVS – DHCP Option – Step by Step

DHCP Preparation

1 – Log into Domain Controller , or server hosting the DHCP Server Role.

2 – Launch DHCP Server Console from Administration Tools

3- Create DHCP Scope where the PVS Targets will be located

4 – Once IP Range, Default Gateway, DNS has been setup , add the following DHCP Scope options:

  • Option 66 [Boot Server Host Name]  – IPAddress of Server/VIP Address of PVS Load Balance
  • Option 67 [Boot File Name: ARDBP32.bin

4 comments

Leave a Reply